Filter By

Tires

How Often Should You Replace Your Tires?

Regularly replacing your tires is crucial to maintain your vehicle’s safety and performance. Tires naturally wear down over time due to factors such as individual driving habits, road conditions, and tire quality. Generally, experts recommend that you replace your tires at a minimum of every six years and no later than ten years - even if they appear to be in good condition. However, it might be necessary to replace them sooner. Here are some telltale signs that it’s time to replace your tires:

Tread Wear: Over time, tires naturally lose their tread, which impacts how well they grip the road and can affect your control. You can check the tread depth of your tires with a tread depth gauge or use the penny test (insert a penny with Abraham Lincoln’s head upside down—if you can see the top of his head, the tread is too low). If the tread depth is less than 2/32 of an inch, it’s time to replace your tires.
Age of the Tires: Even if your tires appear to have plenty of tread left, the rubber can deteriorate over time. If your tires are six to ten years old, you might want to think about replacing them, even if they are not showing visible signs of damage.
Cracked or Damaged Sidewalls: Visible cracks, bulges, or cuts in the sidewalls are signs that the tires are weakening, which could lead to a blowout. Act quickly to address this issue before you find yourself in a dangerous situation.
Frequent Flat Tires: If you’re getting flat or deflated tires more often, it could be a sign that your tires have worn out and are no longer holding air properly. While flat tire repair can provide temporary solutions, if the problem is recurring it might be time for replacement - especially if you’re noticing large punctures or multiple issues in the same area.
Signs of Imbalance: If your vehicle is out of alignment, your tires might wear out unevenly or more quickly than expected. Excessive vibration or a loud, uneven ride could indicate that your tires are out of balance or that there are internal defects to worry about. You might also notice uneven tread wear (such as more wear on one side of the tire, which can be a sign of an alignment or suspension issue. Addressing the issue and replacing your tires can help your vehicle function more efficiently.

By keeping an eye on any warning signs, you can keep your tires in optimal condition. Regular tire checks and replacing them when necessary will help prevent accidents, enhance your vehicle's performance, and extend your vehicle’s lifespan. The team at Odessa Tire Center can help maximize your vehicle’s performance for years to come. Contact our tire shop today to schedule a check!

Back to Search Results

Hankook Kinergy GT H436

Features

Wide circumferential 4 channel grooves / Wider grooves provide maximum water evacuation which promotes wet traction.

Wide lateral groove / Ensures hydroplaning resistance for excellent wet handling and braking.

Step-wing shoulder / Applying step-wing shoulder maximizes water expulsion for outstanding safety.

Optimized block stiffness / Enhanced durability and tread uniformity provides handling performance and high mileage.

Center rib / Rigid center rib ensures excellent grip for outstanding handling / braking performance.

Optimized lateral groove design / Wide lateral grooves provide excellent snow grip which enhances snow traction.

Equalized champer sipe / Champer sipes maximize snow performance with constant snow grip in snow conidtions

Optimized Pitch Sequence / Specific pitch sequence reduces road noise.

High grip silica compound / Higher performance in winter conditions by promoting better grip and traction.

Jointless full cover reinforced belt / Optimized strength to improve tread stability even at high speeds.

Wide steel belt layer / Improved tread stiffness for better handling / braking performance.

Equilibrium carcass line / Increased sidewall durability and stability.

High-stiffness bead filler / Higher sidewall rigidity for improved steering response.

Strong jointless bead wire / Enhanced uniformity of the bead position.